How to glue Silicone foam board? Due to the irregular shape of the foam board, it can not be formed at one time, in order to make the material not wasted, so it must be glued together, then how to glue the foam silicone board together?
First, cut the strips and place them where they are to be glued. Wash them with alcohol. Then use foamed silicone adhesive, according to A: B: C= 10:10:1 (weight ratio) ratio, according to this ratio to take material evenly mixed, stir within 4 hours of use!
Secondly, it is the gluing step, the mixture of evenly mixed glue is decompressed and deglued in a vacuum, and then the glue is applied to the place to be glued. After heating and curing, heating 180 degrees Celsius for 5 to 10 seconds, it can be cured into a silicone gel.
In short, the foam silicone adhesive is used to heat the tube machine to 180 ° C, and the mold is bonded for 5 to 10 seconds, the bonding is firm, not hard, the bonding marks are small and beautiful, and the problem of the adhesion of the foam silicone plate in many cities and many foam silicone plate manufacturers is successfully solved.
